Need help?Do you have a question about the Ubiquiti LiteBeam M5 and is the answer not in the manual?
General| Frequency | 5 GHz |
|---|---|
| Gain | 23 dBi |
| Polarization | Dual Linear |
| Max VSWR | 1.5:1 |
| Wind Survivability | 200 km/h |
| Processor Specs | Atheros MIPS 74Kc, 560 MHz |
| Networking Interface | 1 x 10/100 Ethernet Port |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Operating Frequency | 5150 - 5875 MHz |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating Humidity | 5 to 95% Noncondensing |
| Memory | 64 MB DDR2, 8 MB Flash |
| Power Supply | 24V, 0.5A PoE Adapter (Included) |
| Operating Temperature | -40 to 70° C |
| LEDs | Power |
| Channel Sizes | 5/10/20/30/40 MHz |
| Enclosure Characteristics | Outdoor UV Stabilized Plastic |
| Mounting | Pole Mounting Kit Included |
| ESD Protection | ± 24 kV Contact / Air |
Guides on inserting the antenna feed into the rear housing until it clicks.
Explains how to secure the assembly to a pole using a U-bolt, pole clamp, washer, and flange nut.
Guides on connecting the LiteBeam Ethernet to the PoE adapter, LAN to the adapter, and the power cord.
Steps to ensure host system connectivity and configure its IP address for accessing airOS.
Instructions to access the airOS interface via a web browser and log in.
Provides general safety instructions and details electrical safety requirements, grounding, and power cord usage.
Details FCC rules and conditions for device operation, including interference guidelines and approved antenna types.
Outlines Industry Canada regulations, including interference and approved antenna types for the device.
To Next Page