To Next PageTo Next Page
Need help?Do you have a question about the Ubiquiti LiteBeam M5-23 and is the answer not in the manual?
General| Frequency | 5 GHz |
|---|---|
| Antenna Gain | 23 dBi |
| Memory | 64 MB DDR2 |
| Operating Temperature | -40 to 70°C (-40 to 158° F) |
| Dimensions | 362 x 267 x 184 mm (14.25 x 10.51 x 7.24") |
| Wireless Approvals | FCC, IC, CE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating Humidity | 5 to 95% Noncondensing |
| Wireless Standard | 802.11a/n |
| Max Data Rate | 150 Mbps |
| Wind Survivability | 200 km/h (125 mph) |
| Operating System | AirOS |
| Networking Interface | 10/100 Ethernet Port |
| Weight | 750 g (26.46 oz) |
| Mounting | Pole Mount |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter |
Explains the function and status indication of the wireless connection LED.
Details the Ethernet LED's behavior for active connection and data activity.
Describes the power LED's indication when the device is connected to a power source.
Specifies the Ethernet port's capabilities and connection requirements for LAN.
Outlines the procedure for resetting the device to factory defaults via the reset button.
Explains how to enter cable loss in dB to adjust output power for radio-to-antenna connection.
Lists approved antenna types and their maximum gain for FCC/ISED compliance.
Provides essential safety instructions and warnings for device usage and installation.
Details specific safety measures related to electrical connections and lightning protection.
Details the terms and conditions of the product's limited warranty, including arbitration.
Outlines FCC compliance rules, including device operation and interference limits.
Details ISED Canada compliance for radio apparatus, including licensing and interference.
Specifies compliance with radiation exposure limits and installation distance requirements.
Notes compliance requirements for specific regions like Australia, New Zealand, and Brazil.
Explains the CE marking indicates product compliance with applicable EU directives.
States compliance with the Waste Electrical and Electronic Equipment directive.
Confirms the product meets relevant EU directives and regulations.
Provides links to additional product documentation, user guides, and support.
