Need help?Do you have a question about the Ubiquiti PowerBeam airMAX AC Gen2 PBE-5AC-Gen2 and is the answer not in the manual?
General| Throughput | 450+ Mbps |
|---|---|
| Antenna Gain | 25 dBi |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter (Included) |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Max. Power Consumption | 8.5W |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating Humidity | 5 to 95% Noncondensing |
| Shock and Vibration | ETSI300-019-1.4 |
| ESD Protection | ± 24 kV Contact / Air |
| Max. VSWR | 1.5:1 |
| Wind Survivability | 200 km/h (125 mph) |
| Operating Frequency | 5150 - 5875 MHz |
| Output Power | 25 dBm |
| Frequency | 5150 - 5875 MHz |
| Networking Interface | 10/100/1000 Ethernet |
| Processor | MIPS 74Kc |
| Memory | 64 MB DDR2 |
| Weight | 2.22 kg (4.89 lbs) |
| Wind Loading | 380 N @ 200 km/h (85 mph) |
| Wireless Standard | 802.11a/n/ac |
| Mounting | Pole Mount |
Details the process of assembling the dish reflector, rear housing, and antenna feed.
Explains how to attach the mounting bracket and secure it to a pole.
Describes attaching the dish to the mount and adjusting the elevation angle.
Important instructions and warnings to follow for safe device operation.
Critical information on electrical connections, grounding, and preventing hazards.
To Next Page