Need help?Do you have a question about the Ubiquiti UBI-POWERBEAM-M5-300 and is the answer not in the manual?
General| Model | UBI-POWERBEAM-M5-300 |
|---|---|
| Frequency Range | 5 GHz |
| Max Throughput | 150+ Mbps |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating Temperature | -40 to 70°C |
| Operating Humidity | 5 to 95% Non-Condensing |
| Memory | 64 MB DDR2 |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Wind Survivability | 200 km/h |
| Beamwidth | 15° |
| Power Supply | 24V, 0.5A Gigabit PoE adapter |
| Processor Specs | 400 MHz MIPS 74K |
| Networking Interface | 1 x 10/100/1000 Ethernet |
| Mounting | Pole Mount |
| Weight | 1.2 kg |
Lists all the components included in the product package.
Details the components visible from the bottom of the device, including ports and buttons.
Explains how to reset the device and the function of the release button.
Explains the meaning and behavior of the device's LED indicators for signal, Ethernet, and power.
Illustrates different ways the PowerBeam can be mounted and used for coverage.
Lists necessary tools and cabling requirements for proper installation.
Steps for attaching the dish bracket to the reflector and the rear housing to the bracket.
Instructions for detaching the cable door and securing the antenna feed into the rear housing.
Guides on connecting the Ethernet cable to the antenna feed and re-attaching the cable door.
Details how to mount the device onto a pole using the U-Bolt, washer, and flange nut.
Step-by-step guide on connecting the PowerBeam to the PoE adapter and power outlet.
Instructions for optionally mounting the PoE adapter using a bracket.
Guides on connecting via Ethernet and accessing the airOS configuration interface with login details.
Instructions on selecting the correct dish reflector size within the airOS settings.
General safety instructions and warnings for using the device.
Specific information regarding electrical safety, grounding, and service.
Outlines the terms and conditions of the product's limited warranty.
Lists specific conditions under which the product warranty does not apply.
Explains the process for returning products for replacement or repair.
General disclaimer regarding express and implied warranties and service limitations.
Limits Ubiquiti Networks' liability for damages arising from product use.
Details FCC compliance requirements and conditions for operation.
States compliance with ISED Canada regulations and approved antenna types.
Provides warnings and requirements regarding RF exposure and installation distances.
Notes on Class A product compliance and regional usage restrictions for the 5 GHz band.
Confirms the product's compliance with applicable EU directives.
Explains disposal requirements for the product and packaging according to EU directives.
To Next Page