Ubiquiti U6-MESH User Manual

Ethernet)
• UTP Cat5/6 cable for indoor installations
•The cable outlet opening must be located on the opposite side of the open
environment. •The cable should face downward when mounting on the wall.
•Category 5 (or higher) shielded cabling with drain wire must be used for all outdoor wired
Ethernet connections and must be connected to the AC ground of the PoE.
System Requirements •Linux,
Mac OS X or Microsoft Windows 7/8/10 •Java
Runtime Environment 1.7 (1.8 or later recommended) •Web
Browser: Google Chrome (Other browsers may have limited functionality) •UniFi Controller
Software v5 .4 or later (available at: ui.com/download/unifi)
•Phillips screwdriver
•Drill and bit (6mm for wall mount or 3mm for ceiling mount) •Optional: drywall or
jigsaw (to cut 18mm hole for wire
•We recommend that you protect your networks from harmful outdoor environments and
electrostatic discharge phenomena with Ubiquiti's industrial grade shielded Ethernet cable. For
more information, visit ui.com/toughcable
U6-MESH Quick Start Guide
Outdoor Installation Requirements
installation requirements

Ubiquiti U6-MESH Specifications

General

Wi-Fi Standards	802.11a/b/g/n/ac/ax
Frequency Bands	2.4 GHz, 5 GHz
Maximum Data Rate	5.3 Gbps
Antenna Gain 2.4 GHz	3 dBi
Antenna Gain 5 GHz	5 dBi
Power Method	802.3af PoE
Enclosure Material	Plastic
Mount Material	Plastic
Weatherproofing	IPX5
Operating Temperature	-30 to 60° C (-22 to 140° F)
Supported Voltage Range	44 - 57VDC
Max. TX Power 2.4 GHz	23 dBm
Max. TX Power 5 GHz	26 dBm
Data Rate 2.4 GHz	573.5 Mbps
Data Rate 5 GHz	4.8 Gbps
Wireless Security	WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID	8 per Radio
VLAN	802.1Q
Advanced QoS	Yes
Guest Traffic Isolation	Yes
Concurrent Clients	300+
Ethernet Ports	1 x 10/100/1000 Ethernet Port
Operating Humidity	5 to 95% Noncondensing
MIMO	4x4
Mounting	Wall
Dimensions	48.5 x 159.5 mm (Diameter x Height)