Need help?Do you have a question about the Ubiquiti PowerBeam AC Gen 2 and is the answer not in the manual?
General| Model | PBE-5AC-Gen2 |
|---|---|
| Category | Network Hardware |
| Type | Wireless Bridge |
| Frequency Range | 5 GHz |
| Frequency | 5150 - 5875 MHz |
| Max Throughput | 450+ Mbps |
| Range | 25+ km |
| Antenna Gain | 25 dBi |
| Operating Voltage | 24V |
| Max. Power Consumption | 8.5W |
| Processor Speed | 560 MHz |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Operating Humidity | 5 to 95% non-condensing |
| Wind Survivability | 200 km/h |
| Mounting | Pole Mount |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Power Method | PoE (Power over Ethernet) |
| Processor Specs | MIPS 74Kc |
| Memory | 64 MB |
| Networking Interface | 1 x 10/100/1000 Ethernet |
| Operating Temperature | -40 to 70 °C |
Lists all items included in the product package for installation.
Details the components and ports visible from the bottom of the device.
Explains how to reset the device and use the release button for the antenna feed.
Explains the function of the Power, Ethernet, and Signal LEDs on the device.
Illustrates directional and indoor coverage with different device configurations.
Lists necessary tools and cabling for proper installation and protection.
Guides on aligning the adjustment bracket with the dish reflector for mounting.
Details how to attach the rear housing to the adjustment bracket using alignment pins.
Instructions on checking if the rear housing is securely locked into the dish reflector.
Steps to detach and manage the cable door from the rear housing.
Instructions for inserting and securing the antenna feed into the rear housing.
Guides on connecting the Ethernet cable and re-attaching the cable door.
Details on attaching the pole clamp to the mounting bracket using bolts and nuts.
Steps for mounting the bracket onto a pole and securing it with flange nuts.
Instructions for placing the reflector dish onto the pivot pins of the mounting bracket.
Guides on installing hex bolts into the mounting bracket, advising not to tighten fully.
How to adjust the elevation angle using the indicator and tightening hex bolts.
Step-by-step guide for connecting the device to the Gigabit PoE adapter.
Optional instructions for mounting the PoE adapter using its bracket.
Guide on using the UMobile app to access the airOS configuration interface.
Steps for logging into the device and selecting the country via the UMobile app.
Overview of customizing wireless, network, and system settings via the app.
Instructions for accessing the airOS configuration interface using a web browser and logging in.
Emphasizes installer's responsibility for regulatory compliance and proper device operation.
Detailed technical specifications including dimensions, weight, gain, and operating frequencies.
Important safety instructions regarding product usage, warnings, and attachments.
Information on electrical safety, grounding, and professional service requirements.
Conditions under which the product warranty does not apply or is valid.
Information on the process for returning products for replacement or repair.
Disclaims warranties and limits Ubiquiti's liability for damages arising from product use.
Details the FCC compliance requirements and rules for the device.
Outlines Industry Canada compliance standards and conditions for the device.
Provides warnings and guidelines regarding RF exposure and antenna installation.
Warnings for Class A product and CE marking indicating restrictions on use.
European directives regarding disposal of electrical and electronic equipment.
Official declaration that the device complies with essential requirements of Directive 1999/5/EC.
Links to support, community forums, and downloads for the product.
To Next Page