Need help?Do you have a question about the Ubiquiti PowerBeam PBE-5AC-Gen2 and is the answer not in the manual?
General| Product Name | PowerBeam PBE-5AC-Gen2 |
|---|---|
| Category | Network Hardware |
| Wireless Standard | 802.11ac |
| Frequency Range | 5 GHz |
| Frequency Band | 5 GHz |
| Max. Data Rate | 450 Mbps |
| Throughput | 450+ Mbps |
| Antenna Gain | 25 dBi |
| Output Power | 25 dBm |
| Power Method | Passive PoE |
| Wind Survivability | 200 km/h |
| Certifications | CE, FCC, IC |
| Memory | 64 MB DDR2 |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Max. Power Consumption | 8.5W |
| Shock & Vibration | ETSI300-019-1.4 |
| Max. VSWR | 1.5:1 |
| Polarization | Dual Linear |
| Cross-pol Isolation | 25 dB |
| ETSI Specification | EN 302 502 |
| Max. TX Power | 25 dBm |
| Channel Bandwidth | 20/40/80 MHz |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Mounting | Pole Mount |
| Operating Temperature | -40 to 70 °C |
| Operating Humidity | 5 to 95% non-condensing |
| Enclosure | Outdoor UV Stabilized Plastic |
| Processor Specs | MIPS 74Kc |
| Networking Interface | 1 x 10/100/1000 Ethernet port |
| ESD Protection | ± 24 kV contact, ± 24 kV air |
To Next Page