Do you have a question about the Ubiquiti PowerBeam AC Gen2 and is the answer not in the manual?
Brand | Ubiquiti |
---|---|
Model | PowerBeam AC Gen2 |
Category | Network Hardware |
Language | English |
Details components and ports on the bottom of the device.
Explains the status indicators (LEDs) for Signal, Ethernet, and Power.
Instructions for connecting the device to power using PoE adapter or switch.
Steps for optionally mounting the PoE adapter.
Guide for using the UNMS app for initial setup.
Guide for accessing airOS via the web portal for setup.
Information on selecting and configuring antennas for the device.
Guidance on entering cable loss values for accurate power adjustment.
Lists FCC/ISED approved antenna types and their maximum gain.
Details FCC compliance rules and device operation conditions.
Outlines ISED Canada RSS standards and device operation rules.
Information on radiation exposure limits and installation distance.
Compliance statement for Australia and New Zealand (CISPR 32).
Compliance note for Brazil regarding interference protection.
Confirms product compliance with applicable EU directives.