Need help?Do you have a question about the Ubiquiti UCK-G2 and is the answer not in the manual?
General| Category | Network Router |
|---|---|
| Storage | 32 GB eMMC |
| PoE Input | 802.3af PoE |
| Max. Power Consumption | 5W |
| Certifications | CE, FCC, IC |
| Bluetooth | Yes |
| Supported Devices | UniFi Network devices |
| Management Interface | UniFi Network Application |
| Memory | 3 GB |
| Networking Interface | 1 x 10/100/1000 Ethernet Port |
| Power Method | PoE or USB-C |
| Operating Temperature | 0 to 35° C (32 to 104° F) |
| Operating Humidity | 20% to 80% non-condensing |
| Product Name | Ubiquiti UniFi Cloud Key Gen2 |
| Power Supply | USB-C 5V, 3A |
List of items included in the product package.
Software and hardware needed for setup and operation.
Description of the top panel, including LED status indicators.
Details of the front panel display and icons.
Explanation of ports and buttons on the rear.
Description of rack-mount notch and 13-pin connector.
Methods for supplying power to the Cloud Key Gen2.
Specifics on powering via a UniFi PoE Switch.
Guidelines for safe electrical operation and servicing.
Terms and duration of the product warranty.
Conditions voiding warranty and the RMA process.
Legal disclaimers and limitations of liability.
FCC rules and operational conditions.
ISED Canada, battery, and RF exposure warnings.
Australia/NZ, CE marking, country list, and frequency band notes.
To Next Page