Need help?Do you have a question about the Ubiquiti UniFi AP PRO and is the answer not in the manual?
General| Product Name | Ubiquiti UniFi AP PRO |
|---|---|
| Ethernet Ports | 2 |
| Wi-Fi Standards | 802.11 a/b/g/n |
| Frequency Band | 2.4 GHz and 5 GHz |
| Power Method | Passive Power over Ethernet (48V), 802.3af Supported |
| Power Supply | 48V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 9 W |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| VLAN | 802.1Q |
| Guest Traffic Isolation | Supported |
| Concurrent Clients | 200+ |
| Mounting | Wall/Ceiling |
| Category | Network Access Point |
| Networking Interface | 2 x 10/100/1000 Ethernet Ports |
| Wireless Speed | 450 Mbps |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| BSSID | Up to 4 per Radio |
| Advanced QoS | Rate Limiting |
| Antennas | Internal |
Lists all included components in the UniFi AP-Pro package, such as the AP, mounting bracket, PoE adapter, and accessories.
Details network prerequisites like DHCP and management station setup, illustrating common network diagrams.
Explains the meaning of different LED colors and flashing patterns on the UniFi AP-Pro for status indication and troubleshooting.
Provides initial steps for wall mounting, including positioning the bracket and marking holes on the wall.
Details the process for mounting the UniFi AP-Pro onto a ceiling tile, including marking and drilling holes.
Explains how to power the AP directly using an 802.3af compliant PoE network switch.
Guides on connecting the AP using the included PoE GigE adapter for power delivery.
Instructions for installing the UniFi Controller software on macOS, covering the installation icon and on-screen prompts.
Steps for installing the UniFi Controller on Windows PCs, including launching the installer and Java prerequisites.
To Next Page