Need help?Do you have a question about the Ubiquiti EdgeRouter PRO and is the answer not in the manual?
General| Model | EdgeRouter PRO |
|---|---|
| Manufacturer | Ubiquiti Networks |
| Category | Network Router |
| System Memory | 2 GB DDR3 |
| USB Port | 1 x USB 2.0 |
| Power Method | AC |
| Power Consumption | 40W |
| Operating Temperature | -10 to 45° C (14 to 113° F) |
| Certifications | CE, FCC, IC |
| CPU | Dual-Core 1 GHz MIPS64 |
| SFP Ports | 2 |
| Console Port | 1 x RJ45 Serial Console |
| Power Input | 100-240VAC, 50-60Hz |
| Operating Humidity | 10 - 90% Non-condensing |
| Mounting | Rack-Mountable |
| Supported Protocols | OSPF, RIP, BGP |
| Management | CLI, Web UI |
| Ethernet Ports | 8 x Gigabit RJ45 |
Lists items included in the box such as mounting screws, cage nuts, and power cord.
Details the Console, USB, RJ45, and SFP ports, including their functions and specifications.
Explains the two methods (runtime and power-on) for resetting the device to factory defaults.
Guides attaching the device to a rack using mounting screws and cage nuts.
Steps to access the interface via DHCP, including connecting to a LAN segment with a DHCP server.
States compliance with FCC rules and conditions for operation.
States compliance with Canadian ICES-003 regulations.
Warning about Class A product and potential radio interference.
Explains the WEEE directive for proper disposal of electronic equipment.
States that the ERPro-8 device complies with essential requirements and provisions of EU directives.
Provides the URL for technical support.
Provides the URL for the community forum.
Provides the URL for downloading software and firmware.
To Next Page