Need help?Do you have a question about the Ubiquiti EdgeRouter 12 and is the answer not in the manual?
Identifies and describes the console, USB, RJ45, and SFP ports on the front panel.
Steps to connect and access the EdgeOS configuration via DHCP.
Steps to configure a static IP and access the EdgeOS configuration.
General| RAM | 1 GB DDR3 |
|---|---|
| Flash Storage | 4 GB eMMC |
| Total Ports | 12 |
| Gigabit RJ45 Ports | 10 |
| SFP Ports | 2 |
| Max Power Consumption | 20W |
| Operating System | EdgeOS |
| Layer 3 Forwarding Performance | 3.4 million pps |
| Total Non-Blocking Throughput | 10 Gbps |
| Certifications | CE, FCC, IC |
| Power Supply | 24V, 1A |
| Supported Voltage Range | 100-240V |
| Operating Humidity | 10 to 90% Noncondensing |
| Operating Temperature | -10 to 45° C |
To Next Page