US-48-500W, US-48-750W Quick Start Guide
https://dl.ubnt.com/qsg/US-48-500W_US-48-750W/US-48-500W_US-48-750W_EN.html[1/27/2020 1:40:10 PM]
UniFi Switch Power Cord Mounting Screws (Qty. 4)
Cage Nuts (Qty. 4)
Package Contents
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit:
ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself should be
housed inside a protective enclosure.
IMPORTANT: We strongly recommend using UPS backup and power regulation to
US-48-500W, US-48-750W Quick Start Guide
To Next Page
Need help?
General