Ubiquiti UniFi UVC-G3-Flex - Package Contents; Installation Requirements

Package Contents
G3 Flex Camera Base Mount Pole/Wall
Mount
Outdoor
Cover
Security Screw
(Qty. 1)
Screws
(Qty. 3)
Screw Anchors
(Qty. 3)
Zip Ties
(Qty. 2)
Installation Requirements
• Phillips screwdriver
• Drill and 6 mm (1/4") bit for drywall anchors and 3 mm (1/8")
for screws)
• Category 5e (or above) Ethernet cable
Note: When using the Outdoor Cover, use an Ethernetcable
without a strain-relief boot on the connector. This willprevent
unnecessary tension on the cable ends during installation.
Cable without a strain-relief boot Cable with a strain-relief boot