Need help?Do you have a question about the Ubiquiti UniFi XG and is the answer not in the manual?
General| BSSID | Up to 8 per Radio |
|---|---|
| Wireless Standards | 802.11ac Wave 2 |
| Frequency Bands | 5 GHz |
| Power Method | 802.3bt PoE++ |
| Wireless Security | WEP |
| Supported Voltage Range | 44 to 57VDC |
| Operating Humidity | 5 to 95% non-condensing |
| MIMO | 4x4 |
| Mounting | Wall, Ceiling |
Details the components included in the UniFi AP XG package for installation.
Specific guidelines for mounting the UniFi AP in protected outdoor locations.
Illustrates a typical UniFi network setup including the UAP-XG.
Explains the meaning of the UniFi AP's LED colors and blinking patterns.
Describes how to restart the device or restore it to factory default settings.
Details the functionality of the 1 GbE and 10 GbE Ethernet ports.
Instructions for replacing a UAP-AC-PRO with the UAP-XG using existing hardware.
Step-by-step guide for securely mounting the UniFi AP to a wall.
Steps to prepare a ceiling tile for the UniFi AP mounting bracket.
Instructions for attaching the UniFi AP mounting plate to a T-bar ceiling grid.
Guide for mounting the UniFi AP onto junction or outlet boxes.
How to use the cable feed plug for a secure Ethernet connection.
Powering the UniFi AP via an 802.3bt PoE compliant switch.
Instructions for powering the UniFi AP using the included PoE adapter.
Critical safety information regarding electrical hazards and product use.
Conditions that may void the product's warranty.
Guidelines for product returns and obtaining a Return Materials Authorization (RMA).
Information regarding the device's compliance with FCC rules and regulations.
Environmental disposal guidelines for electronic waste in English.
Official EU Declaration of Conformity for the UAP-XG in English.
To Next Page