After pressing the M button, the meter starts to work and provides
the controller analog circuit working power. In the power on state
long press the M button for 2 seconds to power off the system. In
the off state, the meter no longer uses the battery`s power supply,
and the meter`s leakage current is less than 2μA.
※ If the electric bicycle is not used for more than 10 minutes, the
meter will automatically shut down.
NORMAL OPERATION
1.Power on/off
2.Current display
Indicates the current controller discharge current, each grid is 2A,
greater than 12A display 6 grids.
3.Instant speed
The meter shows the current riding speed of the electric vehicle. The
display is as follows
：
To Next Page
Loading...