Uconnect 7.0 - Page 57

UCONNECT 7.0 SETTINGS
Press the “Settings” button on the bottom bar of the
touchscreen, or press the “Apps ” button on the
touchscreen, then press the “Settings ” button on the
touchscreen to display the menu setting screen. In this
mode, the Uconnect system allows you to access all of
your programmable features.
NOTE:
• Only one touchscreen area may be selected at a time.
• Depending on the vehicles options, available feature
settings may vary.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting until a
check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the Back Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on the
touchscreen to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the screen
will allow you to toggle up or down through the available
settings.
Refer to “Uconnect Settings” in “Multimedia” in the Own-
er’s Manual for further information.
56 UCONNECT SETTINGS