UCS C-SV 4A - Product Handling and Identification; Packing, Unpacking, and Data Plate

Doc. 85588U - Rev. 22/10/2020
USER MANUALUSER MANUAL
ENEN
Drw. 32367/h6/54
A
2. PACKING CONTENTS
3. UNPACKING
4. DATA PLATE
Thecontrolunitsaredeliveredinaboxinsidewhichtherearetheusemanualandthefollowingcomponents:
-6plugs(A)
-6xingscrews(B)
-1cabinetopeningkey(C)
-6transparentgaskets(D)
-3“earthing”adhesives(E)
-1gasketfortheupperplate(F)
Themanufacturer’sidencaonandEuropeanDirecveconformityplateislocatedonthecontrolunit.
Severalsafetywarningsareappliedtothecontrolunit;suchwarningsmustbestrictlyfollowedbyeveryonedealingwiththisproduct.
-



1. Remove the control unit from the box.
2. Removeallthecomponentsfromthepackaging.
TheidencaonplateCE/EACislocatedonthelelowerpartofthecontrolunit.
C
E
B
D
F
WARNINGWARNING
Manufacturer’sidencaon
CE/EACmarking
Model
Electrical features
Part Number
EN12101:10Cercaon
Producondate
Serial Number