4. Operation Mode 8
• Display Panel 8
• Bar Graph Display 8
• Sensitivity Control Dial 8
• Sensitivity / Volume Adjust 8
• Frequency Adjust 9
• Yellow Store Button 9
• Store a Reading 9
• Overwrite Data or Enter Data In a New Location 9
• Text Editor 10
5. Setup Mode 10
• Data Transfer 10
• Set Time & Date 11
• dB Scale Select 11
• dB Offset Val(Value) (This is a Reference dB Level) 12
• Display Mode 12
• Calibration Due Date 13
• Text Editor 13
• Factory Defaults 13
• Exit To Program 14
6. User Instructions 14
• Trisonic- Scanning Module 14
• Method of Airborne Detection 14
• Headset 14
• Rubber Focusing Probe 14
• Stethoscope Module 14
• Stethoscope Extension Kit 14
• Charging The UP9000 14
• Warble Tone Generator 15
• Charging The Warble Tone Generator 15
• Helpful Hints 15
• Auto Shutdown Battery Feature 15
• Resetting The On Board Computer 15
7. Applications
Leak Detection, How to Locate Leaks, Shielding Techniques, Low Level Leaks 16-18
Tone Test (Ultratone) 18-19
Electric Arc, Corona, Tracking Detection 20-21
Monitoring Bearing Wear 21
Detecting Bearing Failure 22
Comparative & Historical Testing 22
Lack of Lubrication 23
Over Lubrication 23
Slow Speed Bearings 23
FFT Interface 23
General Mechanical Trouble Shooting 24
Locating Faulty Steam Traps 25
Traps: Inverted Bucket, Float & Thermostatic, Thermodynamic, Thermostatic 26
Inspecting Valves 27
ABCD Method 28
Leakage Behind Walls 29
Partial Blockage 29
Flow Direction 29
Ultrasound Technology 30
Instructions for Setting Combination Lock On Carrying Case 31
To Next Page
Loading...
Need help?
General
