UE Systems Ultraprobe 9000 User Manual

1
Table of Contents
1. Overview 3
• Ultrasound Technology Instruction Scholarship Certificate 3
• Operation Mode 3
• Setup Mode 3
2. Basic Components 3
A. Plug-In Modules 4
• Scanning Module 4
• Contact Module 4
B. Pistol Grip Housing 4
• Display Panel 4
• Trigger On/Off Switch 5
• I/O Port 5
• Battery Compartment/Battery 5
• Wrist Strap 5
• Sensitivity Control Dial 5
• Storage Entry Button 5
• Head Set Jack 5
• Recharge Jack 5
3. Accessories 6
A. Standard Accessories 6
• Headset 6
• WTG-1 Warble Tone Generator 6
• Rubber Focusing Probe 6
• Stethoscope Extension Kit 6
• 5PC-C9 I/O Cable 6
• BCH-9 Battery Charger 6
• BCH-WTG Battery Charger 6
B. Optional Accessories 6
• LRM-9 6
• CFM-9 6
• UWC-9000 6
• DHC-2HH Hard Hat Headphones 6
• DHC 1991 Ear Piece 6
• SA-2000 Speaker Amplifier 6
• UFMTG-1991 7
• WTG-2SP Warble Pipe Threaded Tone Generator 7
• BP-9 7
• BPA-9 7
• BCH-92 7
• BCH-WTG2 7
• HTS-2 7
• SHEATH 7
• LLA 7
• 5PC-MP 7
• 5PC-BNC 7
• QCH-9 7
• QCH-92 7

UE Systems Ultraprobe 9000 Specifications

General

Brand	UE Systems
Model	Ultraprobe 9000
Category	Measuring Instruments
Language	English