EasyManua.ls Logo

uebe visocor HM50 - Technical Data

uebe visocor HM50
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-70
english
Technical information
E
EN-71
english
Technical information
E
Customer service2.
The unit may only be repaired by the manufacturer or by an expressly
authorised organisation. Please contact:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany
Tel.: +49 (0) 9342/924040
Fax: +49 (0) 9342/924080
E-mail: info@uebe.com
Internet: www.uebe.com
Failure
encountered
Possible cause Corrective action
Date/time not
shown in display
Function accidentally
deactivated. Function was
not reactivated after bat-
tery replacement.
Activate date and time as
described on Page EN-57.
Technical data3.
Unit type: Digital automatic unit with electric pump for
measuring blood pressure at the wrist
Dimensions: approx. W = 70 mm x H = 70 mm x D = 80
mm with cuff
Weight: 121 g with cuff, not including batteries
Display: LCD display (liquid crystal display) for meas-
ured values and check displays
Memory: 60 measured values (stored automatically)
and average value (A)
Measurement
procedure:
Oscillometric determination of systole,
diastole and pulse
Reference procedure of
clinical testing:
Auscultatory measurement
Inflating pressure: Initially up to approx. 190 mmHg, then in
stages of 40 mmHg
Pressure display range: 0-300 mmHg

Table of Contents

Related product manuals