uebe visocor HM50 - Original Spare Parts and Accessories; Applicable Standards

EN-72
english
Technical information
E
EN-73
english
Technical information
E
Measurement range Systolic: 50-250 mmHg
Diastolic: 40-150 mmHg
Pulse: 40-160 pulses/min
Error limits: Blood pressure measurement: corresponds to
EN 1060 Part 3
Pressure measurement: ± 3 mmHg
Pulse measurement: ± 5 %
Serial number: The unit bears a serial number which
provides clear identification.
Power supply: Battery type: 2 x 1.5 V, AAA, LR 03, durability:
over 700 measurements in 2 years
Cuff: Cuff type H5, wrist circumference 12.5 cm
- 21.5 cm
Operating conditions: Ambient temperature 10 to 40 °C, relative
humidity up to 85 %, non-condensing
Storage and transport
conditions:
Ambient temperature -20 to +50 °C, relative
humidity up to 85 %, non-condensing
Air deflation valve: Electronically controlled
Original spare parts and accessories4.
Subject to technical modifications.
Cuff type H5 (for wrist circumference 12.5-21.5 cm)
Part no. 2205001, PZN 9101582
•
Automatic switch-off approx. 3 minutes after end of measurement
IP code: IPX0 not protected
Applicable standards5.
EN 1060-1 : 1995 + A2 : 2009 Non-invasive sphygmomanometers
- Part 1: General requirements
•
EN 1060-3 : 1997 + A2 : 2009 Non-invasive sphygmomanometers
- Part 3: Supplementary requirements for electro-mechanical blood pres-
sure measuring systems
•