EN-52 EN-53
English
English
Technical informationTechnical information
E E
Expected service life: 5 years
Operating mode: Continuous operation
Classification: Internal power supply by battery
4. Original spare parts and accessories
The following original spare parts and accessories are available from
specialist dealers:
Subject to technical modifications.
Universal cuff 22-42 cm, type VWR2
Part no. 2402701
visomat mains adapter
Part no. 2402720, PZN-16363029
5. Technical inspection / calibration check
Generally, it is recommended that a metrological inspection is per-
formed every two years. However, professional users in Germany are
obligated to do so in accordance with the “Medical Products Operator
Ordinance” (Medizinprodukte-Betreiberverordnung).
This can be performed either by UEBE Medical GmbH, an authority re-
sponsible for metrology or an authorised maintenance service. Please
refer to your national regulations.
Upon request, responsible authorities or authorised maintenance ser-
vices receive a “Test instruction for metrological inspection” from the
manufacturer.
6. Explanation of symbols
Please only submit the device for metrological inspection together
with the cuff and the instructions for use.
Important: No modifications, e.g. opening the device (except to re-
place the batteries), may be made to this device without the manufac-
turer’s permission.
This product complies with Council Directive 93/42/EEC of 5
September 2007 concerning medical devices and bears the
mark CE 0123 (TÜV SÜD Product Service GmbH).
Degree of protection against electric shock TYPE BF
Consult the instructions for use
Keep dry
Serial number
0123
Direct current
AC
Manufacturer
Protected against solid foreign particles with a diameter of
more than 12.5 mm, protection against water droplets
I P21
Protection class II (double insulation)
For indoor use only
Micro USB polarity
Reference number = item number
To Next Page
Loading...
Need help?
General
