To Next PageTo Next Page
Need help?Do you have a question about the UEBERALL UBK-1 and is the answer not in the manual?
Details on handling fragile components like lamps, quartz jackets, and sensors.
Requirements for correct operation, water quality, and electrical supply.
Instructions for installing the UV reactor and connecting it to the pipe system.
Steps for installing the Teflon sensor window and O-ring into the sensor housing.
Procedure for inserting and securing the sensor cartridge and connecting the cable.
Instructions for installing the quartz jacket, including O-ring and thrust disk.
Detailed steps for inserting the UV lamp, connecting the cable, and securing the end cap.
Explanation of the three LEDs (Green, Yellow, Red) indicating system status and alarms.
How to adjust the potentiometer on the electronic board for proper system startup.
Key checks and tasks for maintaining the UV system, including lamp replacement.
Procedure to reset the digital operation hour meter after lamp replacement.
A table to diagnose and resolve common system faults based on symptoms.
List of spare parts with part numbers for different UBK models.
General| Brand | UEBERALL |
|---|---|
| Model | UBK-1 |
| Category | Laboratory Equipment |
| Language | English |
