Need help?Do you have a question about the UEi EM201 and is the answer not in the manual?
Check meter/tubing for damage, ventilate if gas leak suspected, professional use only, max 10 PSI input.
Zero meter in non-pressurized area by holding the 'ZERO' button for approx. four seconds.
Connect tube to pressure source; EM201 has positive (right) and negative (left) inputs.
Three-year warranty for defects, covers normal use, excludes misuse, alteration, or consequential damage.
Check meter/tubing for damage, ventilate if gas leak suspected, professional use only, max 10 PSI input.
Zero meter in non-pressurized area by holding the 'ZERO' button for approx. four seconds.
Connect tube to pressure source; EM201 has positive (right) and negative (left) inputs.
Three-year warranty for defects, covers normal use, excludes misuse, alteration, or consequential damage.
General| Model | EM201 |
|---|---|
| Continuity | Yes |
| Audible Continuity | Yes |
| Data Hold | Yes |
| Safety Rating | CAT III 600V |
| Type | Clamp Meter |
| AC Voltage Range | 600V |
| DC Voltage Range | 600V |
| Display | LCD |
To Next Page
