Remote Control 5
5
1. Put the two AAA, 1.5V batteries into
the Battery compartment (8) and push
the cover (9) back until you hear it click
into position. The maximum distance for
transmitting signals between the remote
control (7) and the fan is five meters.
Make sure that no objects can impede
signal transmission.
2. When you are not using the remote
control (7), keep it in the slot (10)
provided at the top of the fan.
3. When you change batteries, use only
new alkaline batteries AAA 1.5V. Dispose
the used batteries for recycling
according to your local regulations.
4. If you are not going to use the remote
control (7) for a longer period (4 weeks
or more), take the batteries out of the
battery compartment.
To Next Page
Loading...
Need help?
General
