Need help?Do you have a question about the Ugolini Quick-GEL and is the answer not in the manual?
General| Category | Ice Cream Maker |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Material | Stainless Steel |
| Cooling System | Air Cooled |
Specifies the warranty duration from the date of purchase, certified by receipt.
Details free replacement or repair of defective parts due to manufacturing defects.
Lists parts/conditions not covered, like aesthetic parts or damage from misuse.
Excludes producer liability for indirect damages to persons or property.
States that all transport expenses are excluded from the warranty coverage.
Outlines that repairs must be done at authorized locations, with buyer bearing transport costs.
Explains warranty expiry and transition to paid service after 12 months.
Excludes appliance replacement or extended warranty after a fault.
States the warranty is void if the identification plate is tampered with.
Confirms warranty is only valid in the buyer's country of legal seat.
Ensure voltage matches supply, connect to single-phase earthed socket.
Prohibits the use of extension cables for connecting the appliance.
States damaged power cables must be replaced by qualified professionals.
Clarifies the dispenser is not designed or suitable for outdoor usage.
Mandates that the dispenser must always be installed in an upright position.
Instructs to always disconnect the dispenser from power before cleaning.
Requires disconnection from power before removing panels for maintenance.
Warns against using a water jet to clean the dispenser.
States the appliance must not be operated by children.
Prohibits children from playing with the appliance.
Restricts use by persons with reduced physical/mental capabilities without supervision.
Allows access to inner components only to persons with practical experience.
Specifies the appliance is for domestic and similar use only.
Requires room temperature between +5°C and +32°C for correct operation.
Instructs to use the appliance only for indicated liquids.
Warns against introducing dangerous or toxic liquids into the appliance.
Advises careful reading of the manual to understand dispenser characteristics.
Remove from packaging, keep for future, check for transport damage.
Place on a suitable counter and ensure adequate clearance for airflow.
Check stability and adjust feet height if necessary.
Emphasizes reading the manual before using the dispenser.
States the dispenser must be correctly earthed to prevent electric shock.
Warns against operating if panels are not in place and secured.
Prohibits inserting fingers or objects into panel slits or tap orifice.
Requires disconnecting power before removing parts for cleaning or maintenance.
Mandates that the dispenser cover must remain closed at all times during operation.
Advises cleaning and sanitizing the dispenser before initial use.
Notes the appliance cannot operate without the tap assembly installed.
Details the steps for assembling the upper and lower parts of the mixing pipe.
Explains how to adjust mixture entry into the cylinder using the mixing pipe.
Guides on closing the cover, powering on, and initiating ice cream preparation.
Describes how to adjust air intake for softer ice cream by rotating the mixing pipe.
Instructs on how to dispense the prepared ice cream using the faucet handle.
Provides guidance on modifying the mix for desired ice cream density.
Explains the dispenser's continuous operation, cooling, and mixing cycles.
Introduces ICE CREAM PRODUCTION, CONSERVATION, and WASHING modes.
Describes the main switch positions for powering on and standby.
Explains how to use the ON/OFF key to switch the dispenser on and off.
Details the meaning of various icons and indicators shown on the touch display.
Explains the ICE CREAM PRODUCTION mode and its status indicators.
Describes the CONSERVATION mode for preserving the mixture.
Outlines the controls for adjusting the ice cream density level.
Explains the function and display indicator for the WASHING mode.
Describes the self-diagnosis system and how to view alarm details.
Details the maintenance alarm and the procedure for resetting it.
Step-by-step guide to remove the upper cover of the dispenser.
Instructions for removing the upper basin mixer if present.
Guides on removing both parts of the mixing tube.
Details the process for removing the front panel of the dispenser.
Instructs to unscrew fastening knobs from the tap assembly.
Guides on removing and disassembling the tap assembly.
Step-by-step instructions for removing the scraper.
Details how to remove the coupling with its seal.
Instructions for removing the drip tray from its seat.
Important safety note regarding damaged power supply cables.
Warnings about disconnecting power and avoiding water near electrical parts.
Instructions on washing the evaporator cylinder, upper tank, and connecting pipe.
Guides on rinsing all washed components under running water.
Advises washing hands with anti-bacterial soap before sanitizing procedures.
Details on preparing the sanitiser solution in a basin.
Instructions for soaking parts in the sanitiser solution for the specified time.
Guidance on air drying sanitised parts and wiping external parts.
Step-by-step instruction to insert the drip tray back into its seat.
Important reminder to lubricate specific parts with provided grease.
Guides on reassembling the coupling and scraper.
Instructions for reassembling the tap assembly in reverse order.
Details on reassembling the front panel of the dispenser.
Guides on fitting the mixer together, ensuring proper insertion of ends.
Explains the process of sanitizing the assembled appliance.
Guides on distributing the solution onto parts above the liquid level.
Instructions to operate the dispenser to mix the sanitising solution.
Details on emptying the dispenser and rinsing with clean water.
Routine daily check for leaks from the tap assembly seal.
Weekly inspection of the scraper coupling seal for wear.
To Next Page
