9
Note
If the drive capacity is below 2TB in the current RAID mode, select MBR., otherwise, select GPT.
Note
The default drive format of Windows and Linux is "NTFS", as for macOS, you must choose the "ExFAT" format.
Drive partitioning: create a "New Simple Volume" and set its capacity.
Select the unallocated space and right click "New Simple Volume", then follow the pop-up windows until the process is completed.
Your PC/laptop will be able to read the drive after formatting.
GPT(GUID Partition Table）
New Simple Volume
NTFS
②
To Next Page
