UGREEN NASync DXP2800 - About the DXP2800; Instructions before Use; Package Contents

1 2
About the DXP2800
UGREEN DXP2800 is a network-attached storage device designed for home and personal users. The
DXP2800 works as an intelligent data management center where users can store and access data via
smartphones, laptops, tablets, and TVs anywhere there is network access.
Package Contents
2×Hard Drive Tray Key1×User Manual 1×Warranty Card
1×Power Adapter
(DC 12V/5A )
1×Ethernet Cable
(CAT7)
1×Network Attached Storage
(For 2.5-inch
Hard Drive Installation)
Screws &
Screwdriver
Instructions Before Use
In order to ensure data transmission efficiency, it is recommended to use a router or switch with Gigabit LAN
ports or higher and to connect the NAS using the included Ethernet cable (CAT7 or higher).
It is recommended to use new hard drives. When installing ANY drive(s), the NAS system will format the drive,
erasing ALL existing data. Ensure any important data is backed up prior to installation.
Please only use the original power adapter, or a safety-certified power adapter, that meets the power
specifications for this device.
Do not insert or remove hard drives when NAS device is on. If necessary, please turn off the device first by
using the app to prevent potential file loss, data corruption, or drive damage.
ONLY update firmware with a stable power supply. Do NOT disconnect the power supply during the update
process.
After unbinding the device, all data will be removed and can NOT be retrieved. Ensure data is backed up
appropriately before unbinding the device.
·
·
·
·
·
·