Ugur UDD 1600 D3KL NF - Temperature Control and Thermostats

| User Manual
18
EN
WARNING!
• Internal temperature of your product can be adjusted between -18°C and -23°C. (In models
wth a dgtal thermometer, adjustment can only be made by an Authorzed Servce.)
• Always provde a gap between the top and the product you load for ensurng ar crculaton.
Setting Internal Temperature of Your Device
Temperature setting of your product has made at the factory in a manner that it is operated under the
most appropriate conditions.
Be careful for always placing frozen product inside your product.
Preservation temperature of the products can be observed from the digital indicator or thermostat
under its canopy and adjusted by means of an electronic thermostat.
When you run your product at factory set value, you get the best result in terms of both the performance
and energy consumption.
Run your device empty for at least three (3) hours. Therefore inside of your product will be cooled down
in the best way.
D- USING YOUR PRODUCT
0
2
3
4
5
6
7
1