Need help?Do you have a question about the UHP NETWORKS Romantis UHP-100 and is the answer not in the manual?
General| Model | UHP-100 |
|---|---|
| Category | Network Router |
| Modulation | QPSK, 8PSK, 16APSK, 32APSK |
| Forward Error Correction (FEC) | LDPC |
| Interfaces | Ethernet |
| Application | Satellite Communications |
| Antenna | External |
| Ports | Ethernet |
| Security | Advanced Encryption Standard (AES) |
Provides a general overview of UHP satellite routers and their capabilities in VSAT networks.
Lists the necessary computer equipment, software, and cables for configuring the UHP-100 router.
Details the serial number, part number marking, and warranty seals on the router.
Lists the items included in the standard UHP-100 package and storage recommendations.
Explains the internal composition and operational principles of the UHP-100 satellite router.
Describes the location of interfaces and indicators on the UHP-100 satellite router.
Lists the main components and modules that make up the UHP-100 router.
Details the DC 24V power connector, its specifications, and power source requirements.
Explains the purpose and indicators of the two LAN Fast Ethernet interfaces on the router.
Describes the USB console port for local device control and required connection cable.
Provides important safety warnings and compatibility information for the TX OUT modulator output.
Explains the function of the RESET button, including factory reset procedures.
Details the IF inputs for LNB connection, power supply, and 10 MHz reference signal.
Explains the meaning of the SYSTEM indicator's flashing patterns for router status.
Describes the ERROR indicator and its flash codes for diagnosing router malfunctions.
Explains the LOCK indicator's function in showing channel reception and error impact.
Describes the RX1 indicator's behavior when receiving data packets on the RX1 interface.
Describes the RX2 indicator's behavior when receiving data packets on the RX2 interface.
Describes the TX indicator's behavior when transmitting data packets.
Presents the operational limits, including voltage, current, temperature, and humidity for the UHP-100.
Details the steps for unpacking, installation, and connecting external devices to the router.
Provides instructions for safely unpacking the router and checking for transport damage.
Guides on proper installation of the UHP-100 router on surfaces or in racks.
Explains how to connect cables to the router, emphasizing safety precautions.
Describes the process of powering on the router and initial readiness confirmation.
Explains how to access and configure the router using its HTTP interface and default IP address.
Details how to connect and access the router locally using the USB console port.
Describes how to access the router remotely via Telnet protocol and session management.
Directs users to the Command Interface manual for detailed command-line operations.
Highlights the advantage of updating software for new features, bug fixes, and improvements.
Provides instructions on how to safely power off the UHP-100 router from AC or DC power sources.
Lists essential safety precautions to follow during router operation and maintenance.
Outlines immediate actions to take in case of fire or smoke originating from the router.
Explains the procedure for resetting user settings and restoring the router to factory defaults.
To Next Page
