Page 64 Ulthera, Inc
V
Code V
Transducer energy deliv ery
halted
Tap Scan Y to resume scanning
If the problem persists please
see the User’s Manual for further
information or contact Ulthera
Support.
Excessiv e reflected power has been
detected. If the problem persists,
please try another transducer and
contact Ulthera Support. Use
Transducer only as instructed. Tap
Scan Y to resume scanning.
W
Code W
Unauthorized transducer.
Please replace the transducer
and continue.
Please contact your local
representativ e for further
assistance.
The transducer connected is not an
authorized transducer. Contact your
local representativ e for further
assistance.
X
Code X
Transducer cannot be read
Please remov e and reinsert the
transducer.
If the problem persists please
see the User’s Manual for further
information or contact Ulthera
Support.
The transducer cannot be read.
Remov e and reinsert the transducer.
Check that the transducer contact
area is clean.
To Next Page
Loading...