2 | P a g e
www.UltimaDentalSystems.com
Ultima 250 Arm Wall/Pole Mount
WALL MOUNT
When installing the wall mount for the Ultima 250 Arm unit, it is best if the wall mount is screwed
into and secured to a wall beam. Use a stud finder, which can be found in most hardware stores,
to locate a beam in the area the Ultima 250 will be installed. However, if this is not possible a
second option is to use Drywall mollies to secure the wall mount, preferably the butterfly type that
spring open behind the drywall for extra holding power.
To Next Page
Loading...
Need help?
General