UE BOOM Immersion Guide
http://www.ultimateears.com/boom-guide/en-us/[3/10/2015 11:46:53 AM]
CONNECT
Pairing your first device
UE BOOM works with Bluetooth-
enabled devices that support
A2DP, such as smartphones,
tablets and personal computers.
When you turn UE BOOM on for
the first time, it automatically
goes into pairing mode and
searches for a Bluetooth source
device to pair with.
Pairing additional devices
To pair UE BOOM with additional
source devices, press UE
BOOM's Bluetooth button for 3
seconds. UE BOOM will enter
pairing mode, make a sound,
and flash its Bluetooth LED while
searching for another device.
Once the next device is paired
with, UE BOOM will sound to
confirm pairing and the
Bluetooth LED will remain solid
white for 15 seconds.
UE BOOM will remember the last
8 devices it was connected to.
The next time the speaker is
turned on, it will attempt to
reconnect automatically to the
last device it was connected to
before it was turned off.
Bluetooth Button
To Next Page
Loading...
Need help?
General
