17
Imax Remark
SOF
(start of Frame)
DLC
(data length)
addressdata
(uint32)
EOF
(end of Frame)
The maximum household
current
0x5AA50x080x00A8IMAx0xA55A
Inow
SOF
(start of Frame)
DLC
(data length)
addressdata
(uint32)
EOF
(end of Frame)
The total occupied household
current
0x5AA50x080x00A9Inow0xA55A
Iset
SOF
(start of Frame)
DLC
(data length)
addressdata
(uint32)
EOF
(end of Frame)
The current set by grid/
smartmeter/PC
0x5AA50x080x00AAIset0xA55A
For example: 140 HEX (Hexadecimal) = 320 DEC (Decimal) = 32.0 Amp
Deactivate access authorisation with RFID card:
The factory setting is that the RFID card
44
is activated. The EV charger
1
must be enabled for charging
using the RFID card
44
. To deactivate access authorisation with RFID card
44
permanently, proceed as
follows:
Briefly press the
37
button
The following image will be displayed on the digital charging display
3
:
Hold the RFID card
44
over the symbol
6a
for a moment.
The following image will be displayed on the digital charging display
3
:
Access authorisation with RFID card is now permanently deactivated.
Activate access authorisation with RFID card:
To activate access authorisation with RFID card permanently, proceed as follows:
Briefly press the
37
button
The following image will be displayed on the digital charging display
3
:
To Next Page