To Next PageTo Next Page
Need help?Do you have a question about the ULTIMATE SPEED ULG 3.8 A1 - MANUAL 4 and is the answer not in the manual?
General| Charging voltage | 6 V / 12 V |
|---|---|
| Protection class | II |
| Output voltage | 6 V / 12 V |
| Output current | 3.8 A |
| Number of batteries | 1 |
| Input voltage | 220-240 V ~ 50/60 Hz |
| Battery capacity | 1.2 - 120 Ah |
Details on the intended application and suitable battery types for the charger.
Lists all items included in the charger package upon purchase.
Identifies and explains the various parts and indicators of the battery charger.
General guidelines and warnings for safe operation and handling of the device.
Step-by-step instructions on how to connect the battery charger to the battery and power source.
How to reset the charger's settings and clear any stored configurations.
Explains how to cycle through the different charging modes available on the device.
Details for using charging mode 1, suitable for 6V lead-acid batteries up to 14 Ah.
Details for using charging mode 2, suitable for 12V lead-acid batteries up to 14 Ah.
Details for using charging mode 3, suitable for 12V lead-acid batteries over 14 Ah.
Details for using charging mode 4, for 12V batteries in cold conditions or AGM types.
How to use the charger to revive completely discharged 12V batteries.
Explains the built-in safety mechanisms that prevent damage to the charger and battery.
