EasyManua.ls Logo

ULTIMATE SPEED ULGD 5.0 E4 - Page 17

ULTIMATE SPEED ULGD 5.0 E4
209 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB/IE/NI/CY/MT
17
Program max. (V) max. (A)
1
7.3 V 0.8 A
2
14.4 V 0.8 A
3
14.4 V 5.0 A
4
14.7 V 5.0 A
Program 1 , “6 V”, (7.3 V / 0.8 A)
To charge 6 V batteries with a capacity less than 14 Ah:
Press the program selector button
8
to select Program 1. The symbol
5
is shown in the LED display. During the charging process, the
charging display
9
flashes and shows how far the charging process has
progressed (1–4 bars). When the battery is fully charged, the status
display shows
10
4 bars. The flashing stops and the device switches to
trickle charging automatically.
Program 2 , “12 V”, (14.4 V / 0.8 A)
To charge 12 V batteries with a capacity less than 14 Ah:
Press the program selector button
8
to select Program 2. The symbol
2
is shown in the LED display. During the charging process, the
charging display
9
flashes and shows how far the charging process has
progressed (1–4 bars). When the battery is fully charged, the status
display shows
10
4 bars. The flashing stops and the device switches to
trickle charging automatically.
Program 3 , “12 V”, (14.4 V / 5.0 A)
To charge 12 V batteries with a capacity of 14 Ah – 120 Ah:
Press the program selector button
8
to select Program 3. The symbol
Press the program selector button
3
is shown in the LED display. During the charging process, the
charging display
9
flashes and shows how far the charging process has
progressed (1–4 bars). When the battery is fully charged, the status
display shows
10
4 bars. The flashing stops and the device switches to
trickle charging automatically.
Program 4 , “12 V”, (14.7 V / 5.0 A)
To charge 12 V batteries with a capacity of 14 Ah – 120 Ah under cold
conditions or to charge AGM batteries.
Press the program selector button
8
to select Program 4.
PLEASE NOTE:
This program starts, with a slight time delay if necessary.
The symbol
4
is shown in the LED display. During the charging
process, the charging display
9
flashes and shows how far the charging
process has progressed (1–4 bars). When the battery is fully charged,
the status display shows
10
4 bars. The flashing stops and the device
switches to trickle charging automatically.
451289_2401_5A-Kfz-Ladegerät_LB8_content.indb 17
28.03.2024 08:54:25

Table of Contents

Related product manuals