ULTIMEA APOLLO P60 - Corner Correction

EN
while the projection screen is a minimum of 70''.
Otherwise, it may cause a failure to focus sharply due to
the limit of the projector's lens and structure.
Corner Correction
If the projected image is stretched or distorted along
both axes due to the angle of the projection, select
[Settings] -> [Projection Settings]->[Corner Correction],
choose the corner you want and press button on the
remote control to adjust.
Zoom in/out
Select [Settings]->[Projection Settings]->[Zoom In/Out].
Use the remote control to resize the picture size.
Intelligent Obstacle Avoidance
Select [Settings] -> [Projection Settings] -> [Intelligent
Obstacle Avoidance]. Select On/Off.
Intelligent Screen Alignment
Select [Settings] -> [Projection Settings] -> [ Intelligent
Screen Alignment]. Select On/Off.
Auto Focus
Focus Manual
Vertical / Horizontal correction
●
Select [Settings]->[Projection Settings]->[Auto Focus].
Select On.
●
Place the projector on a suitable projection surface or
wall, and the projector will perform autofocus until it gets
a clear image.
Press or on the remote control to manually adjust
the focus. Please carefully observe the focus icon until
get a clear image.
When xing your projector in a place, select [Settings] ->
[Projection Settings]. Please turn off Auto keystone and
go back to the previous menu. Select [Vertical Correc-
tion] / [Horizontal Correction], press left or right button
on the remote control to adjust.
09