www.ultraoptics.com page iv
General Safety Notes:
Never change or deactivate safety switches or protection devices in any way!
Work on the Rx must only be performed with the working chamber door closed.
If a lens is lost from the suction cup, remove all remaining lenses from the remaining
spindles, turn off the power and retrieve the lens accordingly. Take proper caution as
various surfaces may be hot.
The machine should be checked for any visible damage during each shift. Any changes,
including changes in operation behavior, must be reported to the supervisor.
The Rx is intended to run with an operator present at all times. It is not intended to be
operated unattended.
To Next Page
Loading...
