Need help?Do you have a question about the Ultratec G3000 and is the answer not in the manual?
General| Brand | Ultratec |
|---|---|
| Model | G3000 |
| Category | Fog Machine |
| Language | English |
Explains the technology behind water-based fog generation using glycol/water mixture and heat exchangers.
Details the LSG Mark II's patented low fog technology using liquid CO2 for sub-zero cooling and continuous low-lying fog effects.
Crucial safety directives for operating the fog machine, including nozzle proximity and fluid usage.
Essential precautions for machine operation, supervision, maintenance, and environmental considerations.
Shows the detailed dimensions and layout of the LSG Mark II unit when equipped with a cart.
Presents the physical dimensions for the LSG Mark II when set up as a standalone unit without a cart or case.
Displays the dimensions for the LSG Mark II when housed within its dedicated road case.
Instructions for connecting the G3000 and LSG Mark II, and powering on the fog machine.
Details the process of connecting the LSG Mark II to a 350lb liquid CO2 tank for operation.
Explains the remote and DMX control functions for the LSG Mark II High Power model.
Recommendations for ducting configurations, including horizontal setups and stage floor pockets.
Details on configuring horizontal ducting for the LSG Mark II, noting backflow prevention.
Illustrates ducting the LSG Mark II output to a stage floor pocket for specific effects.
Diagram showing how to configure ducting for a fog curtain or waterfall effect using a floor pocket.
Instructions for cleaning the exterior casing of the G3000 unit using mild soap and water.
Guidance on maintaining the heat exchanger, emphasizing the use of recommended fluids for longevity.
Lists and describes Ultratec's fog fluids, highlighting compatibility and effects, warning against haze fluid.
To Next Page
