www.ultratecfx.com
13
78.5” square inches. For this example, we will try a 6” diameter duct: 0.78539 x 36=28
If we multiply the cross sectional area of the 6” duct by 3 duct outlets : 28 x 3= 84”. 84 is greater than 78.5 so
the 6” ducting split into 3 ducts is acceptable. Some form of dampening may have to be used to balance the
output of different sized outputs.
LSG Mark II Ducting Suggestions
Horizontal Ducting
LSG Mark II with Stage Floor Pocket
Side View
To Next Page
Loading...