-12-
Before connecting wires, turn off the power switch. Never perform wiring with
the power supplied as an electric shock will occur. Connect the earth wire
correctly. Failure to do so may result in electric shock if a failure or earth
leakage occurs. Installation of a dedicated earth leakage breaker is also
recommended.
A start mode of this motor is condenser start / operating method.The
switching of the start / operation reaches by electronic governor
switch.When I apply voltage of the inverter control because I use an electron
element for electronic governor switch, malfunction of the electronic
governor switch occurs and causes the motor stumbling-block. Please never
apply voltage of the inverter control.
Perform electric wiring correctly in accordance with the “Electric Equipment
Technical Standard” and “Internal Wiring Regulation.” Incorrect wiring
will result in fire.
Install an overload protector suitable for the capacity of the motor. If an
overload protector is not installed, or if an overload protector that is
unsuitable for the motor capacity is installed, the motor will be damaged
leading to fire.
Caution
Warning
Caution
Warning
To Next Page
Loading...
