7
window appears.
3. Click the Custom icon to open the window that contains the variables you
are adjusting.
The Custom icon controls the values for the E-mail, Fax and OCR features. You
must configure the variables for each function separately before the image is
scanned to specified destination what you want.
Note that you could configure all three features at one time, but only the last
feature you configured is the destination the image will be scanned to.
To configure the values for the e-mail function
1. Select the e-mail application you want to send the scanned image to, the
type of image you are scanning, the desired resolution, a scanning
intensity level and the document size of the scanned image, by clicking
on the arrow to the right of each field.
2. Click the OK button to save the Custom push button configuration
settings.
3. Push the Custom button. The scanner will start the scanning
process and send the scanned image to the selected e-mail application.
To Next Page
Loading...
Need help?
General
