8
3.4 Attaching the Unger CleanXpress extension pole
(sold separately)
• The tool is designed to use Unger CleanXpress extension poles
only.
• When using extension poles, be sure locking pin is locked into
corresponding pin holes (picture 7).
• To unlock, press the locking pin and separate the extension poles.
3.0 ASSEMBLY INSTRUCTIONS (Continued)
4.0 USE
7
1Sec.
3
×
9
8
1. Press the microber pad against the surface (picture 8).
2. When you are just starting on your rst surface or when using a new
pad, press the activation button to apply one to two sprays to
pre-moisten the pad.
3. Make three circular motions to moisten pad evenly, then wipe entire
surface area clean. During the cleaning process, use as little liquid
as possible (picture 9).
4. DO NOT OVERSATURATE THE PAD. Because the pad is made from
high performing microber material, it only needs to be damp.
5. After use, pour out any excess cleaning solution and rinse the
reservoir thoroughtly.
To Next Page
Loading...
