UNI-T UPO3000E Series - Chapter 5 Trigger System Settings; Trigger System Fundamentals; Edge Trigger Configuration

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TIMebase:WINDow:OFFSet
 Command format：
:TIMebase:WINDow:OFFSet <offset>
:TIMebase:WINDow:OFFSet?
 Functional description：
For adjust WINDow offset value（zoom timebase <Zoomed>）,wave shift relative to screen center.
 Return format：
Query return<offset> value by scientific notation method, unit is s.
 For example：
:TIM:WIND:OFFS 1 set WINDow offset value as 1s
:TIM:WIND:OFFS? query return 1.000e000
:TIMebase:SCALe
 Command format：
:TIMebase:SCALe {<scale> | UP | DOWN}
:TIMebase:SCALe?
 Functional description：
Set timebase position of MAIN, s/div.
<scale>：timebase value；
UP：plus one position based on the current position；
DOWN ：minus one position based on the current position.
 Return format：
Query return< scale> value by scientific notation method, unit is s/div.
 For example：
:TIM:SCAL 2 set MAIN offset value as 2s/div
:TIM:SCAL? query return 2.000e000
:TIMebase:WINDow:SCALe
 Command format：
:TIMebase:WINDow:SCALe < scale >
:TIMebase:WINDow:SCALe?
 Functional description：
For adjust WINDow timebase（zoom timebase <Zoomed>）, that is s/div.
 Return format：
Query return < scale> value by scientific notation method, in s/div.
 For example：
:TIM:WIND:SCAL 2 set WINDow timebase offset value as 2s/div
:TIM:WIND:SCAL? query return 2.000e000