UNI-T UPO3000E Series - Pulse Width Trigger Setup

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TIMebase:INDPendent
 Command format：
:TIMebase:INDPendent { {1|ON} | {0|OFF} }
:TIMebase:INDPendent?
 Functional description：
The switch setting of independent mode of time base.
 Return format：
Query return 1 or 0，it presents ON or OFF.
 For example：
:TIM:INDP ON turn on independent mode of time base
:TIM:INDP? query return 1
FUNCtion Command
Display the operational result plus, minus, multiply, divide, AND, OR, negation,
exclusive OR and FFT of CH1,CH2,CH3,CH4 waveform, set filter to use expression
operation.
:FUNCtion:MATH:MODE
 Command format：
FUNCtion:MATH:MODE {MATH|FFT|LOGic|FILTer|ADVance}
FUNCtion:MATH:MODE?
 Functional description：
Select MATH function mode.
 Return format：
Query return{MATH|FFT|LOGic|FILTer|ADVance}.
 For example：
FUNC:MATH:MODE FFT select MATH mode as FFT mode
FUNC:MATH:MODE? query return FFT
:FUNCtion:OPERation
 Command format：
:FUNCtion:OPERation {ADD | SUBTract | MULTiply | DIVide | AND|OR|NOT|XOR}
:FUNCtion:OPERation?
 Functional description：
Set functional operator, including basic operation and logic operation, they are plus, minus,
multiply, divide, AND, OR, negation, exclusive OR.
 Return format：
Query return{ADD | SUBTract | MULTiply | DIVide | AND|OR|NOT|XOR}.