UNI-T UPO3000E Series - Duration Trigger Setup

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:MEASure:PDUTy?
 Command format：
:MEASure:PDUTy? [<source>]
 Functional description：
Measuring positive duty ratio of the specified channel waveform, <source> take value as
CHANnel1, CHANnel2, CHANnel3 or CHANnel4. Ignore means the current channel.
 Return format：
Query return 5.000e001，unit is %.
:MEASure:NDUTy?
 Command format：
:MEASure:NDUTy? [<source>]
 Functional description：
Measuring negative duty ratio of the specified channel waveform, <source> take value as
CHANnel1, CHANnel2, CHANnel3, and CHANnel4. Ignore means the current channel.
 Return format：
Query return 5.000e001，unit is %。
:MEASure:PDELay?
 Command format：
:MEASure:PDELay? [<source1>,<source2>]
 Functional description：
Measuring <source1> and <source2> relative to time delay of rise edge, <source> take value as
CHANnel1, CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return-1.000e-004，unit is s.
 For example：
Measuring the relative to time delay of rise edge
{
:MEAS:DEL:SOUR CHAN1,CHAN2
:MEASure:PDEL?
}
equivalent to
{
:MEASure:PDEL? CHAN1,CHAN2
}