UNI-T UPO3000E Series - Timeout Trigger Configuration

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
MEASure Command
This command is for oscilloscope basic measurement, return test result by scientific
notation method.
:MEASure:ALL
 Command format：
:MEASure:ALL {{1 | ON} | {0 | OFF}}
:MEASure:ALL?
 Functional description：
The switch setting of all measurement function.
 Return format：
Query return whether all measurement function is turn on.
 For example：
:MEASure:ALL ON turn on all measurement function
:MEASure:ALL? query return1
:MEASure:CLEar
 Command format：
:MEASure:CLEar
 Functional description：
Empty the current measured parameter value.
 For example：
:MEAS:CLE delete the current measured parameter value
:MEASure:SOURce
 Command format：
:MEASure:SOURce <source>
:MEASure:SOURce?
 Functional description：
Select measurement source, <source> is CHANnel<n>，n take value as 1, 2, 3, 4.
 Return format：
Query return{CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4}.
 For example：
:MEAS:SOUR CHAN1 choose channel 1 as measurement source
:MEAS:SOUR? return CHANnel1