UNI-T UPO3000E Series - Page 33

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:MEASure:PREShoot? [<source>]
 Functional description：
Measuring preshoot of the specified channel waveform, <source> take value as CHANnel1,
CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return1.230e-002，unit is V.
:MEASure:FREQuency?
 Command format：
:MEASure:FREQuency? [<source>]
 Functional description：
Measuring frequency of the specified channel waveform, <source> take value as CHANnel1,
CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return 2.000e003，unit is Hz.
:MEASure:RISetime?
 Command format：
:MEASure:RISetime? [<source>]
 Functional description：
Measuring rise time of the specified channel waveform, <source> take value as CHANnel1,
CHANnel2, CHANnel3 CHANnel4. Ignore means the current channel.
 Return format：
Query return 5.000e-005，unit is s.
:MEASure:FALLtime?
 Command format：
:MEASure:FALLtime? [<source>]
 Functional description：
Measuring fall time of the specified channel waveform, <source> take value as CHANnel1,
CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return 5.000e-005，unit is s.
:MEASure:PERiod?
 Command format：
:MEASure:PERiod? [<source>]
 Functional description：