UNI-T UPO3000E Series - Chapter 9 Automatic Measurement; Parameter Measurement Overview

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
Exceed-amplitude Trigger
:TRIGger:WINDow:SLOPe
 Command format：
:TRIGger:WINDow:SLOPe {POSitive|NEGative|ALTernation}
:TRIGger:WINDow:SLOPe?
 Functional description：
Set edge trigger mode，POSitive, NEGative and ALTernation.
 Return format：
Query return edge trigger mode {POSitive|NEGative|ALTernation}.
 For example：
:TRIGger:WINDow:SLOP POS set the window trigger as POSitive
:TRIGger:WINDow:SLOP? query return POSitive
:TRIGger:WINDow:LEVel
 Command format：
:TRIGger:WINDow:LEVel {LOW | HIGH}
:TRIGger:WINDow:LEVel?
 Functional description：
Set the level mode of window trigger.
 Return format：
Query return {LOW | HIGH}.
 For example：
:TRIGger:WINDow:LEV HIGH set the level mode of window trigger as HIGH
:TRIGger:WINDow:LEV? query return HIGH
:TRIGger:WINDow:TIME
 Command format：
:TRIGger:WINDow:TIME <time>
:TRIGger:WINDow:TIME?
 Functional description：
Set the time interval of window trigger.
 Return format：
Query return the current time interval，unit is s.
 For example：